The product performance of injection type planting reinforcement glue, planting reinforcement technology is to use high strength chemical adhesive to make reinforcement, screw and concrete to produce strong anchoring force, so as to achieve embedded parts effect.
1.Use method of injection glue
setting the site of hole, according to the drawing.
2.Drilling works
The depth and diameter of drilling holes should meet the requirements of the code to meet the adhesive area of colloid and ensure the drawing strength of planting bars.
3.cleaning the hole, twice at least.
4. glue preparation
The injection type glue is equipped with a static mixer and glue gun. The colloid that is not fully mixed in the front end is removed before glue injection. When filling the glue must start from the bottom of the hole, about two-thirds of the hole depth.
5.steel rusting removed, before insert , the rust should be removed, and keep clean.
6.installation and fixing.
The reinforcement is inserted in a single direction until it reaches the specified depth.
7.Let stand for curing
Colloidal has not reached the curing period before the need for static maintenance, shall not disturb the reinforcement.
Post time: Aug-18-2022